Buying guide for Best sergers
If you’re serious about sewing, a serger is a great tool to have because it creates overlock stitches using multiple threads. Though a serger is less versatile than a sewing machine, it is the easiest way to create the durable and elastic overlock stitch.
Though a serger is limited in its functions, it works far faster than a sewing machine and gives your creations a tidy and professional look. The number of threads a serger can handle will vary, with most machines ranging from two to four threads. Most machines will include a variety of stitch types by varying the tension and stitch length. You should have a clear idea of what projects you will use your serger for before you pick out a model.
A serger can make a great addition to your arsenal of sewing tools, but it’s a purchase that should be made after careful consideration.
Serger vs. sewing machine
What's the difference between a serger and sewing machine? It's a common question, especially from people looking at these machines for the first time.
- A sewing machine is a superb all-rounder. It can perform all kinds of tasks beyond just sewing two pieces of material together, but it normally does so with one thread and one needle.
- A serger, or overlock machine, is a specialist tool. It may have one or two needles and the capacity to sew with anywhere from two to eight threads.
- Because it uses multiple interlocked threads, there's a certain amount of “give,” or elasticity, in a serger seam. An ordinary sewing machine seam tends to pull at knits and delicate fabrics.
- A serger can cut excess material away from a seam as you work. The blade is right by the needles, so it makes for a really neat finish. (You can turn it off or remove it if you don’t want this function.)
- Sergers work quickly. A typical sewing machine runs at around 600 stitches per minute. The slowest serger featured on our list, the American Home, runs at 1,100 stitches per minute. The fastest on our list, the JUKI, can complete 1,500 stitches per minute.
Even the best serger will not replace your sewing machine entirely. Although they can do it, most are not great for zippers or buttonholes, and no serger can perform top-stitching.
When we research sergers, we consider how easy the serger is to use for a beginning hobbyist versus an experienced sewist.
The stitch speed of a serger is a key factor in our research. Whereas a sewing machine runs at around 600 stitches per minute, sergers can handle between 1,100 and 1,500.
We consider how much control a serger offers. Features such as a foot control and free arm helps the user control sewing speed and tackle challenges such as sleeves and cuffs.
Cost is a key factor in our research. Sergers can cost more than $1,000, but good-quality sergers for home use are available for less than $400.
We check to see whether the serger manufacturer offers a warranty. Warranties might cover only parts of the machine and typically range from 90 days to 25 years.
We evaluate how easy the serger is to thread. With up to eight threads involved, threading can be complex, but manufacturers sometimes offer color coding, DVD tutorials, and pre-threading to make it easier.
We consider the perks and drawbacks of 3/4 sergers compared to 2/3/4 sergers. The latter offers more stitch variety, whereas 3/4 sergers tend to be more specialized.
We check for color-coded threading dials that make sergers easier to use.
We consider stitch variety in our evaluations. Sergers let you customize thread tension and stitch length. Some even have presets for specialized stitches such as rolled hems.
We look for a differential feed, which controls the speed at which fabric moves through the machine. This feature helps prevent fabric from pulling and helps sewists create gathers.
3/4 serger vs. 2/3/4 serger
The numbers above represent the number of threads a particular machine uses to create a stitch. It stands to reason, then, that a 2/3/4 serger offers more stitch variety that a 3/4 serger. However, two-thread stitches are more specialized (you can use them for creating a rolled hem, for example), so for many consumers, a 3/4 machine is all that is needed.
On the surface, that would suggest that the 2/3/4 sergers gives your more choice. But there's much more to choosing the best serger than the number of threads it uses.
With several threads to deal with, sergers aren't always easy to set up. A conscientious manufacturer takes this into account and makes the process as easy as possible.
STAFF
BestReviews
Stitch versatility
Professional garment makers tell us that the most important single feature in serger stitching is differential feed. It controls the speed at which your material passes beneath the presser foot. It's vital for creating gathers and for the successful serging of fabrics without pulling. All of the sergers that made our final review have this feature.
A serger gives you control of thread tension and stitch length, but does not necessarily give you control of stitch width. Additionally, most manufacturers will make your life easier by providing a number of pre-sets for things like rolled hems.
Despite the fact that it’s a 3/4 machine, the Brother 1034D offers 22 stitch types, making it by far the most flexible serger of our final five. In fact, although this is a fairly low-cost machine, it's a feature you'll find hard to beat at any price.
Expert Tip
You can use a two- or three-thread stitch to create a good hem, but the three-thread stitch might be a bit more bulky.
STAFF
BestReviews
Threading complexity
Is a serger difficult to thread? In truth, this can be one of the most intimidating aspects of using a serger. One thread is difficult enough; with a serger, you’ve got four to deal with!
Manufacturers understand this, but unless you're spending thousands of dollars on a professional machine that uses jets of air to blow the threads through, you’ll probably need a little time to get used to the threading process.
Colored thread paths and printed charts can help you along. Instructional DVDs are common, and there are numerous online videos at YouTube and other sites. Some sergers even come pre-threaded, which is great for beginners.
Control
A free arm is a must-have if you work with sleeves and cuffs.
A foot control (similar to what you’d see on an ordinary sewing machine) gives you speed control and keeps your hands free.
All sergers have knives to cut away extra fabric, but the amount of control you have is often minimal.
Did you know?
Because several interlocking threads are used to create a seam, serger threads are thinner than standard thread. This prevents your seams from being too bulky.
STAFF
BestReviews
Useful accessories
Sergers come with a variety of accessories: screwdrivers for changing needles, tweezers, oil, a cleaning brush, a hex wrench, sometimes a pair of scissors.
However, while most of these things are nice to have, it's unlikely you'd find anything in the accessory realm that would “make or break” your serger choice.
Price
How much should you expect to pay for a serger? It's difficult to find a capable all-rounder for under $150, though prices do fluctuate, and there are often sales or promotions you can take advantage of.
Professional sergers can easily cost ten times that amount, though it's our opinion that most home users can get the machine they need for less than $400.
The quality question
Many sergers come from companies you already recognize as makers of sewing machines or other home electronics. Others may not be so well known, but take a glance at these machines, and they look remarkably similar.
So how do you differentiate the good from the mediocre?
- Owner feedback can be an excellent guide, though you do need to be careful. People are quick to complain but slow to compliment, and that can skew the results.
- Warranty information is a good indicator of a manufacturer’s confidence in its product. But again, caution is needed. The casing of a machine might have a 25-year warranty, whereas the internals (the parts more likely to break down) may only be guaranteed for 12 months. In some cases, this warranty can be as short as 90 days.
- Price also provides an indication of worth. Costlier machines generally have more metal parts inside. Cheaper ones use more plastic. You would expect the former to last longer, but there's no hard and fast rule. A machine’s longevity and durability also depend on how often you use your serger and whether you work primarily with delicate or heavy fabrics.
